ALYA INSTALLATION AND USER’S MANUAL - EN
Edition 2.0 Sept 2018 Pag. 7 di 32
2 GENERAL FEATURES
2.1 DESCRIPTION OF THE PRODUCT
The light source on the head is generated by two LED’s, fucused with secundary lens and then reflected by
two reflecting parabolas.
The parabolas enable a regular and uniform spotlight at each lightning level and to distribute light intensity
in the operative field, minimiing hard shadows generated by the users.
Adjustment of light intensity can be carried out with a joystick or proximity sensor. The proximity sensor
switches on and off the light without having direct contact, reducing the risk of cross contamination.
The “automatic switch on” or “Auto-on” function allows the light to switch on automatically each time the
light power supply is activated.
The remote cable allows the light commands to be duplicated by the dental unit. Follow the instructions
provided in the installation paragraph.
On the head near the joystick and/or the proximity sensor there is a button which allows the
synchronization function with the room lamp produced by Faro.
The synchronization function allows the Alya lamp to control the level of illumination of the room light in
order to guarantee a uniform level of illumination between the operating area and the surrounding zone, in
order to reduce the effect of glare and to improve Visual comfort.
In the version with light on the rear arm called “Alya with Theia Tech” the light source is composed of a
series of LED whose light passes through a beam diffuser for distribution in the area below.
Adjustment of the lighting intensity is perfomed in synchronous mode with the dental light.
To Next Page
Loading...
