www.fastech.co.kr
Option for Motor Drive : Ezi-SERVO-PR only
■ Cable for Input/Output Signal
Available to connect between Control System and Ezi-SERVO Plus-R.
Refer to ① of 「5.2 Controller Configuration」.
■ Cable for Power
Available to connect between Power and Ezi-SERVO Plus-R.
Next is for 86mm drive.
Refer to ④ of 「5.2 Controller Configuration」.
■ Extension Cable for Motor
Available to extended connection between motor and Ezi-SERVO Plus-R.
Next is for 86mm drive.
Refer to ③ of 「5.2 Controller Configuration」.
To Next Page
Loading...
