Technical specifications – Noise/Vibrations/Electrical
02-17-2021 4812325897EN 12
Technical specifications
Noise/Vibrations/Electrical
Vibrations - Operator station
(ISO 2631)
The vibration levels are measured in accordance with the operational cycle described
in EU directive 2000/14/EC on machines equipped for the EU market, with vibration
switched on, on soft polymer material and with the operator’s seat in the transport
position.
Measured whole-body vibrations are below the action value of 0.5 m/s² as specified in
Directive 2002/44/EC. (Limit is 1.15 m/s²).
Measured hand/arm vibrations also were below the action level of 2.5 m/s² specified in the
same directive. (Limit is 5 m/s²).
Electrical system
The machine was tested for electromagnetic
compatibility (EMC) in accordance with EN
13309:2000: "Construction machinery"
Noise level
The noise level is measured in accordance with the maximum limit described in Resolução
Nº 433 do Conselho Nacional do Meio Ambiente – CONAMA, relative to compactor rollers,
considering the connected vibration (high amplitude).
Guaranteed sound power level, LwA 111 dB (A)
Sound pressure level at the operator's ear (cab), LpA 85 dB (A)
During normal operations, the values abovementioned may differ, depending on the work
specific conditions.
To Next Page
Loading...
