Fayat Group Dynapac CA25 - Maintenance - Lubricants and Symbols

Maintenance - Lubricants and symbols
02-17-2021 4812325897EN 59
Maintenance - Lubricants and symbols
Always use high-quality lubricants and the amounts
recommended. Too much grease or oil can cause
overheating, resulting in rapid wear.
ENGINE OIL
Air temperature -15°C - +50°C
(5°F-122°F)
Dynapac Engine oil 200
P/N 4812161855 (5L)
P/N 4812161856 (20L)
HYDRAULIC OIL
Air temperature -15°C - +50°C
(5°F-122°F)
Ambient air temperature
above +40°C (104°F)
Dynapac Hydraulic oil 300
Shell Tellus T100 or
equivalent.
P/N 4812161867 (5L)
P/N 4812161868 (20L)
TRANSMISSION
OIL
Air temperature -15°C - +40°C
(5°F-104°F)
Air temperature 0°C (32°F) -
above +40°C (104°F)
Dynapac Gear oil 300
Shell Spirax S2 ALS 85W-140
P/N 4812161883 (5L)
P/N 4812161884 (20L)
CARTRIDGE OIL
Air temperature -15°C - +40°C
(5°F-104°F)
Dynapac Drum Oil 1000
P/N 4812161887 (5L)
P/N 4812161888 (20L)
GREASE
Dynagrease
P/N 4812030096 (0.4 Kg)
FUEL
See engine manual.
COOLANT
Anti-freeze protection down to
about -37°C (-34.6°F).
Mixed in equal parts with
water (50/50)
Dynapac coolant 100
P/N 4812161854 (20L)
Other fuel and lubricants are required when operating
in areas with extremely high or extremely low ambient
temperatures. See the ‘Special instructions’ chapter,
or consult Dynapac.