To Next PageTo Next Page
Need help?Do you have a question about the Fayat Group DYNAPAC CA6000 and is the answer not in the manual?
Explanation of WARNING and CAUTION symbols used in the manual.
Recommendations for operator training and safe use.
Operating near edges with unstable substrate.
Safe driving practices on edges, ditches, and uneven ground.
Safety guidelines for high-pressure cleaning of the machine.
Safety regarding ROPS structure modifications and repairs.
Safety precautions for welding on the machine.
Procedures for safe battery removal and connection.
Step-by-step guide for jump-starting the machine using 24V.
Torque specifications for bolts based on thread and strength.
Definitions and approval standards for protective structures.
Detailed explanation of each control and its function.
Explanation of yellow and red warning indicators.
Explanation of the start screen and status screen.
Detailed explanation of cab controls.
Instructions for using defroster, heat, and AC/ACC controls.
How to select AUTO, Cool, Heat, and Defrost modes.
Fuse layout and function table.
Fuse amperage and function table for master switch.
Fuse box in the cab roof and its functions.
Pre-operation checks and master switch activation.
Adjusting seat position for comfort and control access.
Detailed adjustments for operator seat comfort.
Adjusting control unit rotation and steering column angle.
Ensuring parking brake is engaged for starting.
Explanation of the interlock system and its functions.
Safety requirements for operator position and seat belt use.
Detailed procedure for engine start-up.
General rules for operating the roller.
Safe operation procedures, including seating and speed.
Selecting low gear for slopes to protect the engine.
Daily checks of interlock, emergency stop, and parking brake.
Activation of manual and automatic vibration.
Procedures for activating/deactivating vibration.
How to engage and disengage manual vibration.
Changing amplitude setting safely.
Optimizing vibration speed based on soil type.
Normal and emergency braking procedures.
Stopping the roller using the F/R lever and parking brake.
Procedure for emergency braking using the stop button.
Procedure for shutting down the machine and HVAC system.
Procedures for parking the roller.
Switching off the master switch for security and battery protection.
Procedure for towing with the engine running.
Procedure for towing when the engine is not running.
Daily maintenance tasks.
Procedure for changing hydraulic fluid.
Procedure for replacing hydraulic filter.
Procedure for changing oil in drum cartridge.
Procedure for changing oil in planetary gears.
Procedure for changing oil in rear axle differential.
Procedure for changing oil in drum gearbox.
Replacing or cleaning engine fuel filter.
Procedure for changing engine oil and filter.
Procedure for replacing the urea pump filter.
Replacing the urea tank suction filter.
General| Brand | Fayat Group |
|---|---|
| Model | DYNAPAC CA6000 |
| Category | Construction Equipment |
| Language | English |
