Machine description
4812163801.pdf2019-04-30
"MACHINE SETTINGS"
“Exhaust Cleaning”
Normally not necessary to use.
Initiate cleaning can be used if the Exhaust System
Cleaning Lamp is shown in the display. Then a
so-called parked regeneration can be done and the
parking button must be activated and that low speed is
selected, then the speed will increase to
1000-1200rpm for 20-45 minutes depending on the
soot load.
Note that the engine must have reached operating
temperature before this can be done.
"SERVICE MENU"
The service menu is also accessible via the main
menu for adjustments.
"ADJUSTMENTS"
"TESTMODES" - Installation personnel only, requires
pin code.
53
To Next Page
Loading...
