EasyManua.ls Logo

Fayat Group DYNAPAC CA6000 - Warning indication - membrane panel (Keypad); Display explanations

Default Icon
178 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Machine description
4812163801.pdf2019-04-30
Warning indication - membrane panel (Keypad)
"Yellow" - Warning"Yellow" - Warning
- The engine has an alarm in category yellow (Alarm image shown in the display)- The engine has an alarm in category yellow (Alarm image shown in the display)
- Communication with the display is interrupted- Communication with the display is interrupted
- The fuel level is below <10%- The fuel level is below <10%
- Charging absent- Charging absent
"Red" - Warning Flashes red continuously"Red" - Warning Flashes red continuously
- The engine has an alarm in category red (Alarm code shown in the display)- The engine has an alarm in category red (Alarm code shown in the display)
- Communication with the engine is interrupted- Communication with the engine is interrupted
- The engine temperature is too high- The engine temperature is too high
- Low oil pressure in the engine- Low oil pressure in the engine
- The air filter is clogged- The air filter is clogged
- The hydraulic fluid temperature is too high- The hydraulic fluid temperature is too high
- The hydraulic fluid filter is clogged- The hydraulic fluid filter is clogged
Display explanations
Fig. Start screen
When the ignition key is activated to position I, a start
screen is visible in display. This is shown for a few
seconds and then switches over to the status screen.
Before activating the starter motor, wait until the start
image has changed to the status image (the machine
is performing a system check while the start image is
being displayed).
41

Table of Contents

Related product manuals