Fayat Group DYNAPAC CA6000 - Identification; Product and Component Plates; Product Identification Number on the Frame

Machine description
4812163801.pdf2019-04-30
Identification
Product and component plates
1, 2
2
3
4
5
1. Product plate - Product Identification Number (PIN), model/type designation1. Product plate - Product Identification Number (PIN), model/type designation
2. Engine plate - Type description, product and serial numbers2. Engine plate - Type description, product and serial numbers
3. Cab/ROPS plate - Certification, product and serial numbers3. Cab/ROPS plate - Certification, product and serial numbers
4. Component plate, rear axle - Product and serial numbers4. Component plate, rear axle - Product and serial numbers
5. Component plate, drum - Product and serial numbers5. Component plate, drum - Product and serial numbers
1
1
Fig. Front frame
1. PIN
Product identification number on the frame
The machine PIN (product identification number) (1) is
punched on the right edge of the front frame or the
upper edge of the right frameside.
29