Fayat Group Dynapac CA25 - Product Plate - Identification

Product plate – Identification
02-17-2021 4812325897EN 22
Product plate – Identification
Product identification number on the frame
The machine PIN (product identification number) (1) is punched
on the right edge of the front frame.
Machine data plate
The machine data plate (1) is attached to the left side of the rear
frame, beside the steering joint.
The plate specifies the manufacturer's name and address, the
type of machine, the PIN product identification number (serial
number), service weight, engine power and year of manufacture.
(If the machine is delivered outside the EU there are no CE
markings, and on some machines the year of manufacture may
not be specified.)
Please state the machine's PIN when ordering
spares.
Explanation of 17PIN serial number
A = Manufacturer
B = Family / Model
C = Check letter
D = Manufacturing year
E = Production unit
F = Serial number
100
00123
V
E
B
123456
A
B
C
D
E
F
Fig. Chassi frontal
1. PIN
Fig. Rear frame
1. Machine data plate
Fig. Front frame
1. PIN
1
1