02-17-2021 4812325897EN 9
Special Instructions
Standard lubricants and other recommended oils
and fluids
Before leaving the factory, the systems and components
are filled with the oils and fluids specified in the lubricant
specification. These are suitable for ambient temperatures
in the range -15°C to +40°C (5°F - 105°F).
Higher ambient temperatures, above +40°C
(104°F)
For operation of the machine at higher ambient
temperatures, however maximum +50°C (122°F), the
following recommendations apply:
The Diesel engine can be run at this temperature using
normal oil, the following oils must be used:
Hydraulic system –mineral oil, Shell Tellus 15W40 or
equivalent.
Lower ambient temperatures - Risk of freezing
Make sure that the cooling system is emptied/ drained
(sprayer, hoses, tanks) or that anti-freeze has been added
to prevent the system from freezing.
Temperatures
The temperature limits apply to standard versions of
rollers.
Rollers equipped with additional equipment, such as noise
suppression, may need to be more carefully monitored in
the higher temperature ranges.
To Next Page
Loading...
