FeelTech FY6600 Series - Sweep Start Position

To Next Page

To Previous Page

FeelTech

30 FY6600 Series User’s Manual

Sweep Start Position

When Sweep function is enabled. Sweep start position need to be set

according to sweep objects.

 Frequency Sweep: Press STAR button to highlight start frequency

parameter. Press the Arrow buttons and rotate the ADJ Knob to set the

specified value. For example:

START：00’010.000’000’000kHz

 Amplitude Sweep: Press STAR button to highlight start amplitude parameter.

Press the Arrow buttons and rotate the ADJ Knob to set the specified value.

For example:

START：10.00V

 Offset Sweep: Press STAR button to highlight start offset parameter. Press

the Arrow buttons and rotate the ADJ Knob to set the specified value. For

example:

START：00.00V

 Duty Cycle Sweep: Press STAR button to highlight start duty cycle

parameter. Press the Arrow buttons and rotate the ADJ Knob to set the

specified value. For example:

START：50.0%