FeelTech FY6600 Series User Manual

FeelTech
FY6600 Series User’s Manual 39
Synchronization
Press the [SYNC] button to enter the synchronization function setting
interface. Press corresponding buttons on the right to highlight or cancel selecting
status.
When the synchronization of corresponding parameters are activated, the
corresponding parameters of CH2 will vary according to variation of CH1
automatically. The parameters workable for synchronization include waveform,
frequency, amplitude, offset, and duty cycle, which can be set separately.
When WAVE is highlighted, the waveform of CH2 will vary according to
variation of CH1.
When FREQ is highlighted, the frequency of CH2 will vary according to
variation of CH1.
When AMPL is highlighted, the amplitude of CH2 will vary according to
variation of CH1.
When OFFS is highlighted, the offset of CH2 will vary according to variation
of CH1.
When DUTY is highlighted, the duty cycle of CH2 will vary according to
variation of CH1.

FeelTech FY6600 Series Specifications

General

Brand	FeelTech
Model	FY6600 Series
Category	Control Unit
Language	English