FeelTech FY6600 Series User Manual

FeelTech
2 FY6600 Series User’s Manual
Main Features:
 Adopt DDS technology to generate accurate, stable signal with low distortion.
 Adopt ABS plastic shell with table type design. Use 100-240V (AC) wide
range voltage power supply.
 2.4 inch TFT Color LCD with 320× 240 resolution can display all the
parameters of both channels and current functions of all buttons .
 Frequency output of Sine wave can be up to 60MHz. 250MSa/s sampling rate.
14 bits vertical resolution.
 Use the process, long press the parameter adjustment knob (OK button), you
can quickly save the instrument output parameters, the next boot,
automatically load the saved parameters.
 Complete independent dual channels can work at same time and phase
difference is adjustable.
 Following function allows users to synchronize all or partial parameters of
CH2 to CH1.
 Two instruments or more can be synchronized by SYNC interface.
 Various Waveform:
 Sine
 Square
 Triangle/Ramp
 Rise Sawtooth
 Fall Sawtooth
 Lorenz Pulse
 Multitone
 Noise
 Electrocardiogram (ECG)
 Trapezoidal Pulse
 Sinc Pulse
 Narrow Pulse
 Gauss White Noise
 Step Triangle
 Positive Step
 Inverse Step
 Positive Exponent
 Inverse Exponent
 Positive Falling Exponent
 Inverse Falling Exponent
 Positive Logarithm
 Inverse Logarithm
 Positive Falling Logarithm
 Inverse Falling Logarithm
 Linear FM
 AM
 FM
 Positive Half Wave
 Negative Half Wave
 User-defined waveform

FeelTech FY6600 Series Specifications

General

Brand	FeelTech
Model	FY6600 Series
Category	Control Unit
Language	English