Feig Electronic TST WU - Other Applicable Documents; Entering expanded parameterizing mode

TST Expanded Startup WU
FEIG ELECTRONIC GmbH Page 3 of 18 WU_erweiterte_ Inbetriebnahme4_GB.doc
Contents
1 Other Applicable Documents 3
2 Entering expanded parameterizing mode 3
3 Optimizing door operation 4
3.1 Opening the door .........................................................................................................................4
3.2 Closing the door...........................................................................................................................5
3.3 New request for automatic limit switch calculation .................................................................6
3.4 Correcting the end positions......................................................................................................6
4 Input parameterizing 6
5 Output parameterizing 6
6 Maintenance counter 7
7 Parameter list 8
1 Other Applicable Documents
This function description is an addition to the Startup manual.
It describes only additional setting and functions which are not already contained in the Startup manual.
WARNING
The contents of the Startup manual and in particular the safety advisories must be strictly observed.
2 Entering expanded parameterizing mode
To enter expanded mode a password must be entered.
For this the following parameter must be set:
P.999: 2 = expanded startup mode