FEMA ELECTRÓNICA . Series M . M60-C1
5
Digits
number of digits 6
led 7 segments led
color red or green
digit height 14 mm
Reading
maximum reading 999999
minimum reading -199999
decimal point congurable X.X.X.X.X.X.
overrange / underrange congurable to ash, reset or preset (see
secon 1.19.16)
display refresh 15 readings / second
memory retenon yes, retains reading value in case of pow-
er loss
Signals accepted NPN, PNP, Namur, pick-up, TTL, induc-
ve, mechanical, quadrature, ...
Max. Vdc at input ±30 Vdc
Input impedance 2K4 with pull-up or pull-down resistor
470K without pull resistor
Accuracy of the quartz ±0.01 %
Thermal dri 20 ppm / ºC
Excitaon voltage congurable
output voltage +18 Vdc, +15 Vdc, +9 Vdc, +5 Vdc
maximum current 70 mA
protecon yes, current limited to 70 mA
Frequencies counter modes (see Table 3)
ratemeter modes (see Table 4)
periodmeter modes (see Table 5)
Power
power ‘H’ 85 to 265 Vac/dc
power ‘L’ 11 to 60 Vdc and 24/48 Vac
isolaon* 2500 Ve with power ‘H’
1500 Ve with power ‘L’
*tested for 60 sec.
consumpon <1.5 W only meter
<4.0 W meter with opons
Conguraon 3 buons front keypad
Front protecon IP54 standard
IP65 oponal (see secon 3.2)
Output and control opons relays, analog outputs, serial communi-
caons (see secon 2)
Mechanical
mounng panel
connecons plug-in screw terminal
housing material ABS, polycarbonate (V0)
weight <150 grams
front size 96 x 48 mm (1/8 DIN)
panel cut-out 92 x 44 mm
depth from panel 91 mm (including terminals)
Temperature
operaon from 0 to +50 ºC
storage from -20 to +70 ºC
warm-up me 15 minutes
Counter Mode Frequency Secon
Counter
‘FAST’ mode acve max. 250 KHz 1.19.2
normal mode max. 9 KHz 1.19.2
Counter + inhibion max. 9 KHz 1.19.4
Counter + control A/S max. 9 KHz 1.19.5
Counter dierenal max. 9 KHz 1.19.6
Counter
quadrature
mode x1 max. 17 KHz 1.19.3
mode x2 max. 16 KHz 1.19.3
mode x4 max. 11 KHz 1.19.3
Table 3 - Maximum input frequency for counter modes
Ratemeter Mode Frequency Secon
Ratemeter
normal mode max. 900 KHz 1.19.7
‘SLOW’ mode ac-
ve
max. 200 KHz
min. 1 mHz
1.19.7
Ratemeter
quadrature
mode x1 max. 17 KHz 1.19.8
mode x2 max. 16 KHz 1.19.8
mode x4 max. 11 KHz 1.19.8
Table 4 - Maximum and minimum input frequency for ratemeter modes
Periodmeter Mode Frequency Secon
Periodmeter
normal mode max. 900 KHz 1.19.9
‘SLOW’ mode ac-
ve
max. 200 KHz
min. 1 mHz
(1000 sec.)
1.19.9
Table 5 - Maximum and minimum input frequency for periodmeter modes
1.12 Mechanical dimensions (mm)
1.11 Technical specicaons
44
92
Panel
cut-out
16
8
75
96
48