Fender RUMBLE STAGE 800 - Page 24

There are two ways to add an eect.
In the rst method, highlight one of the two placeholder plus-sign symbols in the SIGNAL PATH LAYER by
turning the ENCODER. The circle containing the plus-sign symbol will turn green. Press the ENCODER to see
a menu of eects categories—Stompbox, Modulation, Delay and Reverb. Highlight a category by turning
the ENCODER, then press the ENCODER to access the eects in that category. Scroll through the eects and
press the ENCODER to select an eect.
The SIGNAL PATH LAYER will then display the newly added eect in a green box with a blinking white arrow
below it and a label above it, indicating that the eect can be moved to a dierent position (if preferred) by
turning and then pressing the ENCODER.
When an eect is added, the box containing the preset number will change from blue to red (indicating that
a preset edit has been made), and the SAVE utility button will illuminate. With the eect now added, further
edits can then be made or the SAVE utility button can be pressed to keep completed edits (see illustrations
below and on next page). Note that pressing the PRESET LAYER button corresponding to the circled “X” in the
DISPLAY WINDOW closes the eects category and eect menus; pressing it when it corresponds to the label
“back” returns the user to the previous screen.
22
With the eect moved to a new position (as indicated here by white arrow below it and label above it), contin-
ue editing other parameters or press the illuminated SAVE utility button to keep completed edits.
ADDING AN EFFECT
To add an eect, highlight the placeholder plus-sign symbol by turning the ENCODER to it. The circle contain-
ing the plus-sign symbol will turn green. Press the ENCODER to access a menu of eects categories.
After moving the selected eect by turning the ENCODER, press the
ENCODER to select its new position in the signal path.
BASIC OCTOBOT
42
RUMBLE
V3
AMPLIFIER
PRE FX 2
SMALL
ROOM
OCTO
BOT
TYPE
POST
LVL DCAY DWLL DIFF TONE
SAVE
BASIC OCTOBOT
42
RUMBLE
V3
AMPLIFIER
PRE FX 2
SMALL
ROOM
OCTO
BOT
TYPE
POST
LVL DCAY DWLL DIFF TONE
RUMBLE
V3
AMPLIFIER
RUMBLE V3 OD
05