Fender RUMBLE STAGE 800 - Editing Effect Parameters

In the second method of adding an eect, highlight an existing eect in the SIGNAL PATH LAYER and press
the ENCODER. Select “ADD FX” from the menu of eects placement options and press the ENCODER again.
Select one the four eects categories that will appear and press the ENCODER to access the eects in that
category. Scroll through the eects and press the ENCODER to select an eect.
The SIGNAL PATH LAYER will then display the newly added eect in a green box with a blinking white arrow
below it and a label above it, indicating that the eect can be moved to a dierent position (if preferred) by
turning and then pressing the ENCODER.
When an eect is added, the box containing the preset number will change from blue to red (indicating that a
preset edit has been made), and the SAVE utility button will illuminate. With the eect now added, further ed-
its can then be made or the SAVE utility button can be pressed to keep completed edits (see illustrations below
and on next page).
24
In another way to add an eect, highlight an existing eect within a preset by turning the
ENCODER to it and pressing the ENCODER to see a menu of four eects categories.
Select “ADD FX” in the eects placement options menu by scrolling to it and pressing the ENCODER.
Select an eects category by scrolling to it and pressing the ENCODER.
Select an eect by scrolling to it and pressing the ENCODER.
BASIC OCTOBOT
SMALL
ROOM
OCTO
BOT
RUMBLE
V3
AMPLIFIER
POST FX 1
42
TYPE
POST
LVL DCAY DWLL DIFF TONE
ADD FX
BYPASS
DELETE
MOVE
REPLACE
MODULATION
STOMPBOX
DELAY
REVERB
GREENBOX
MODERN BASS OD
PARAMETRIC EQ
ENVELOPE FILTER
BLACKBOX
back