EasyManuals Logo

Ferroli Connect CRP User Manual

Ferroli Connect CRP
Go to English
364 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #98 background imageLoading...
Page #98 background image
98
EN
cod. 3542B380 - Rev 00 - 05/2022
3. Conrmthechoicewiththe button:ascreenwillappearrequestingconrmation.
4. Select“Conrm”withthe
and buttons, then press the button.
5.7.2 FAST DHW MODE
The FAST DHW function (if active) allows the water in the DHW circuit to be heated as quickly as possible.
NOTE This function can be useful when domestic hot water is needed and the system has been in standby
mode for a long period.
1. Follow the path:
MENU >> SETTINGS >> FAST DHW
2. Modify the value using the
and buttons: the permissible values are:
0: Not active (The fast DHW mode is deactivated)
1: Active (The fast DHW mode is activated)
3. Conrmthechoicewiththe
button:ascreenwillappearrequestingconrmation.
4. Select“Conrm”withthe
and buttons, then press the button.
5.7.3 OPTIMUM MODE
The OPTIMUM function allows the set temperature to be reached exactly at the desired time, increasing user comfort.
This function is made possible by a self-learning algorithm which, in a smart way, calculates the most convenient time
to turn the system on/off.
It is possible to enable the function to anticipate turning the unit on (START), and turning it off (STOP).
NOTE The two functions can be activated individually or both, for heating and cooling.
NOTE If the STOP function is set on a band that precedes another where the START function has been acti-
vated, the STOP function does not activate.
1. Follow the path:
“MENU >> SETTINGS >> OPTIMUM”
2. Use the
and buttons to select “START”, to enable or disable the function when the system is started, or
“STOP”, to enable or disable the function when it is turned off.
3. Press the
button to access the function activation/deactivation screen
4. Select the desired item with the
and buttons, then press the button. A screen will appear requesting
conrmation.
NOTE The “OPTIMUM” function can be activated in automatic mode and only in the programmed time bands.
5.8 LANGUAGE SETTING
1. Follow the path
“MENU >> SETTINGS >> DISPLAY >> LANGUAGE”
2. Use the
and buttonstoselectthedesiredlanguageandconrmwiththe button.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Ferroli Connect CRP and is the answer not in the manual?

Ferroli Connect CRP Specifications

General IconGeneral
BrandFerroli
ModelConnect CRP
CategoryRemote Control
LanguageEnglish

Related product manuals