3.6 Safety Inspections and Tests
Factory inspections and tests by the manufacturer.
1. Airborne noise measurement
- According to the Machinery Directive
(Position 1.7.4/f)
2. Tests and inspections in terms of DIN EN 60204-1
(Edition 2007)
- Check whether the electrical equipment corresponds to the
technical documentation (chap. 18.1)
- Continuous connection of the protective
conductor system (chap. 18.2)
- Insulation resistance tests (chap. 18.3)
- Voltage tests (chap. 18.4)
- Protection against residual voltage (chap. 18.5)
- Function tests (chap. 18.6)
The functions of the electrical equipment,
particularly those concerning safety and
protective measures, were tested
To Next Page
Loading...
