High Voltage Power Supply
Type: CARRERA
The chapter Cleaning / Maintenance is intended for skilled
personnel only. Maintenance, cleaning and repair work may
only be carried out by skilled personnel.
Skilled Person
A person with relevant technical training, know-how, experience
and knowledge of applicable standards to enable him or her to
assess the work assigned to him or her and to perceive potential
risks.
The above definition is based on EN 60204-1.
The operating and maintenance personnel are trained in the
use of the electron beam evaporator at its point of installation
by personnel from FERROTEC GmbH.
Should you have any questions or be uncertain about
anything, please contact FERROTEC GmbH.
For trouble-free operation of the electron beam evaporator it is
absolutely essential that it is cleaned and serviced at regular
intervals.
Maintenance and cleaning of vendor components (e.g. drive
motor) are described in their manufacturer's separate
instruction handbooks. They are contained in the technical
reference material.
To Next Page
Loading...
