ferrotec CARRERA - Function Test Plan

Version 1.3_15 EN
49
High Voltage Power Supply
Type: CARRERA
8.3.1 Function test plan
Interval for One-Shift System
W
M
½ Y
Y
MIH
Emergency stop system (emergency stop buttons)
X
Mains isolator (main switch)
X
Check all electric terminal and plug connections
X
Push buttons and switches on the switch cabinet
X
Check all plug, screw and clamped joints for firmness
and tighten if necessary
X
Function check of the electric drives
X
8.3.2 Inspections
1. Carry out a visual inspection of the switch cabinet.
Check:
- the wiring for kinks, abrasions and burns,
- the covers and insulation for damage,
- the switch cabinet doors for ease of movement.
2. Carry out a function test of all subassemblies in setting mode
and in manual mode.
If all the functions work properly, the machine is handed over to
the operating personnel.