Festo 8079862 - Page 5

Filtration Learning System
© Festo Didactic 696684
5
11.5 Actuation with PLC EduTrainer and control console ______________________________________ 45
11.5.1 Cable connections between station and EduTrainer PLC _______________________________ 45
11.5.2 Cable connections between control console and PLC EduTrainer ________________________ 47
11.5.3 Establish 1-bit communication connections _________________________________________ 47
11.5.4 Load sample project ____________________________________________________________ 48
11.5.5 Starting the sequence __________________________________________________________ 49
11.5.6 Operation on the control console with operator unit TP700 Comfort _____________________ 50
11.6 Actuation with EasyPort 19″ _________________________________________________________ 55
11.7 Adjusting sensors _________________________________________________________________ 56
11.7.1 Capacitive proximity sensor ______________________________________________________ 56
11.7.2 Float switch, lateral installation ___________________________________________________ 57
12 Maintenance and troubleshooting _______________________________________________________ 58
12.1 Maintenance ______________________________________________________________________ 58
12.2 Error in the piping system and tanks __________________________________________________ 59
12.3 Error in the electrical system _________________________________________________________ 59
12.4 Mechanical error __________________________________________________________________ 60
12.5 Error due to parameterization ________________________________________________________ 60
13 Further information and updates ________________________________________________________ 61
14 Disposal ____________________________________________________________________________ 61
15 List of figures ________________________________________________________________________ 62