Filtration Learning System
58 © Festo Didactic 696684
12 Maintenance and troubleshooting
12.1 Maintenance
Festo Didactic systems and components are to a great extent maintenance free. The following components
should be cleaned at regular intervals with a soft, lint-free cloth or brush:
• The lenses on the optical sensors, the fiber optics and the reflectors
• The active surface of the proximity sensor
• The entire station
Note
Always use water of drinking water quality. If the MPS PA Station is not used for a longer period of
time, the water should be drained off, the remaining water should be removed from the containers
and pipes with a wet vacuum cleaner and rubbed dry with a lint-free cloth.
Observe the instructions in the data sheets!
To Next Page
Loading...
