Festo CMMO-ST-C5-1-LKP User Manual

CMMO-ST-C5-1-LKP
8 Festo – GDCP-CMMO-ST-LK-C-HP-EN – 2017-05b – English
Target group
This documentation is intended exclusively for technicians trained in control and automation techno
logy, who have experience in installation, commissioning, programming and diagnostics of positioning
systems.
Version status
This documentation refers to the following version of the motor controller:
– Firmware: V 1.5.x and higher
– FCT plug-in: CMMO-ST V 1.5.x and later
The following details are displayed in the software with an active online connection:
– Firmware version and MAC-ID è “Info” tab of the integrated web server
– Hardware version, firmware version è FCT (“Controller” page)
If at this time there is no online connection, the information from the most recent
connection is displayed.
Additional version details, e.g. amendment: è product labelling of the motor controller
Note
Before using a newer firmware version:
 Check whether a newer corresponding version of the FCT plug-in or user documenta
tion is available è www.festo.com/sp.
Service
Please consult your regional Festo contact if you have any technical problems.

Festo CMMO-ST-C5-1-LKP Specifications

General

Brand	Festo
Model	CMMO-ST-C5-1-LKP
Category	Controller
Language	English