CMMP-AS-...-M0
Festo – GDCP-CMMP-M0-HW-EN – 1511c – English 3
Table of Contents – CMMP-AS-...-M0
Instructions on this documentation 6.................................................
Target group 6...................................................................
Product identification, versions 6....................................................
Service 6.......................................................................
Specified standards/directives 6....................................................
Documentation 8................................................................
1 Safety and requirements for product use 9......................................
1.1 Safety 9..................................................................
1.1.1 Safety instructions for commissioning, repair and de-commissioning 9........
1.1.2 Protection against electric shock through protective extra-low voltage (PELV) 10.
1.1.3 Intended use 10.....................................................
1.2 Requirements for product use 11...............................................
1.2.1 Transport and storage conditions 11....................................
1.2.2 Technical requirements 11............................................
1.2.3 Qualification of the specialists (requirements for the personnel) 11............
1.2.4 Range of application and certifications 11................................
2 Product overview 13.........................................................
2.1 The entire system for the CMMP-AS-...-M0 13.....................................
2.2 Scope of delivery 14..........................................................
2.3 Device view 15..............................................................
3 Mechanical installation 19....................................................
3.1 Important notes 19..........................................................
3.2 Mounting 20................................................................
3.2.1 Motor controller 20..................................................
4 Electrical installation 23......................................................
4.1 Safety instructions 23........................................................
4.2 Allocation of the plug connectors 25.............................................
4.3 Connection: I/O communication [X1] 29..........................................
4.3.1 Plug [X1]: 29.......................................................
4.3.2 Pin assignment [X1] 29...............................................
4.3.3 Use analogue inputs as digital inputs 30.................................
4.4 Connection: Resolver [X2A] 32..................................................
4.4.1 Plug [X2A] 32.......................................................
4.4.2 Pin assignment [X2A] 32..............................................
4.5 Connection: Encoder [X2B] 33..................................................
4.5.1 Plug [X2B] 33.......................................................
To Next Page
Loading...
Need help?
General
