Festo CMMP-AS-...-M0 Series User Manual

CMMP-AS-...-M0
8 Festo – GDCP-CMMP-M0-HW-EN – 1511c – English
Documentation
You will find additional information on the motor controller in the following documentation:
User documentation on the motor controller CMMP-AS-...-M0
Name, type Table of contents
Hardware description,
GDCP-CMMP-M0-HW-...
Mounting and installation of the motor controller CMMP-
AS-...-M0 for all variants/output classes (1-phase, 3-phase), pin
assignments, error messages, maintenance.
Function descriptions,
GDCP-CMMP-M0-FW-...
Functional description (firmware) CMMP-AS-...-M0, Instructions
on commissioning.
Description FHPP,
GDCP-CMMP-M3/-M0-C-HP-...
Control and parameterisation of the motor controller via the
FHPP Festo profile.
– Motor controller CMMP-AS-...-M3 with the following field
busses: CANopen, Modbus TCP, PROFINET, PROFIBUS, Ether
Net/IP, DeviceNet, EtherCAT.
– Motor controller CMMP-AS-...-M0 with fieldbus CANopen,
Modbus TCP.
Description CiA 402 (DS 402),
GDCP-CMMP-M3/-M0-C-CO-...
Control and parameterisation of the motor controller via the
device profile CiA 402 (DS 402)
– Motor controller CMMP-AS-...-M3 with the following field
busses: CANopen and EtherCAT.
– Motor controller CMMP-AS-...-M0 with fieldbus CANopen.
Description CAM-Editor,
P.BE-CMMP-CAM-SW-...
Cam disc function (CAM) of the motor controller CMMP-
AS-...-M3/-M0.
Description of the safety function
STO, GDCP-CMMP-AS-M0-S1-...
Functional safety engineering for the motor controller CMMP-
AS-...-M0 with the integrated safety function STO.
Help for the FCT plug-in CMMP-AS User interface and functions of the CMMP-AS plug-in for the
Festo Configuration Tool è www.festo.com/sp.
Tab. 5 Documentation on the motor controller CMMP-AS-...-M0

Festo CMMP-AS-...-M0 Series Specifications

General

Brand	Festo
Model	CMMP-AS-...-M0 Series
Category	Controller
Language	English