Festo CMMS-AS-C4-3A-G2 User Manual

CMMS-AS-...-G2 – STO
Festo – GDCP-CMMS-AS-G2-S1-EN – 1306NH – English 5
Notes on this documentation
This documentation serves the purpose of safe work with the safety function STO – “Safe Torque Off ”
with use of the motor controller CMMS-AS-...-G2.
• In addition, always observe the general safety regulations for the CMMS-AS-...-G2.
The general safety regulations for the CMMS-AS-...-G2 can be found in the hardware doc-
umentation, G DCP-CMMS-AS -G2-HW-...  Tab. 1 .
Observe the information rega r ding safety and the requirements for product use in
chapter 1.
Product identification
This documentation refers to the following versions:
– Motor controller CMMS-A S -...-G2 from Rev 01.
– Motor controller CMMS-A S -...-G2 from Rev 02.
– Firmware from FW 1.4.0.2.4.
The representation on the rating plate can be found in the hardware description,
GDCP-CMMS-AS-G2-HW-...
Service
Please consult your regional Festo contact if you have any tec hnical problems.

Festo CMMS-AS-C4-3A-G2 Specifications

General

Brand	Festo
Model	CMMS-AS-C4-3A-G2
Category	Controller
Language	English