Festo CMMS-AS-C4-3A-G2 User Manual

CMMS-AS-...-G2 – STO
6 Festo – GDCP-CMMS-AS-G2-S1-EN – 1306NH – English
Documentation
You will find additional information on the motor controller in the following documentation:
User documentation on the motor c ontroller CMMS-AS-...-G2
Name, type Contents
Hardware description,
GDCP-CMMS-AS-G2-HW-...
Assembly, installation, pin allocation and error messages
Description of the STO safety
function, GDCP-CMMS-AS-G2 -S1-...
Functional safety engineering for the motor controller with the
STO safety function
Description of function,
GDCP-CMMS-AS-G2-FW-...
– Functional description and commissioning with FCT
– Control interfaces and device profiles
Description of device profile FHPP,
P.BE-CMM-FHPP-SW-...
Control and parameterisation of the motor controller via the
device profile FHPP from Festo
Description of device profile CiA 402,
P.BE-CMMS-FHPP-CO-SW-...
– Description of the C AN interface of the motor c ontroller
– Control and parameterisation of the motor c ontroller via
the device profile CiA 402 (DS 402)
PROFIBUS description,
P.BE-CMM-FHPP-PB-SW-...
Description of the PROFIBUS interface of the motor controller
DeviceNet description,
P.BE-CMMS-FHPP-DN-SW-...
Description of the DeviceNet interface of the motor controller
Help on the FCT plug-in CMMS-AS User interface and functions of the CMMS-AS plug-in for the
Festo Configuration Tool  www.festo.com
Tab. 1 Documentation for the motor controller CMMS-AS-...-G2

Festo CMMS-AS-C4-3A-G2 Specifications

General

Brand	Festo
Model	CMMS-AS-C4-3A-G2
Category	Controller
Language	English