Festo Controller CECC
6
2.5 Libraries
To simplify programming, CODESYS V3 pbF enables usable objects such as
– function blocks
– declarations
– visualisations
to be organised into project-independent libraries.
Library Comment
Festo_CECC_3.library For controlling and parameterising the CECC.
Festo_CECC_IOLink_3.library For controlling and parameterising the IO-Link devices.
Festo_EasyIP_3.library For simple networking of controllers via EasyIP.
Festo_Motion_3.library For configuring motor controllers from Festo (e.g. CMMP-AS).
Festo_CVE_3.library For actuating motor controllers that support the CVE protocol from
Festo (e.g. CMMO-ST).
Festo_CameraControl_3.library For accessing the Compact Vision System SBO...-Q.
Festo_SerialComEx_3.library For configuring the serial interfaces RS232, RS422 and RS485.
Table: Libraries for programming the CECC
A Library Manager that can be used to integrate and view libraries is available for this.
Detailed descriptions of the libraries and how to program them can be found in the respective
online Helps.
To Next Page
Loading...
Need help?
General
