Need help?Do you have a question about the Festo CPX-FB38 and is the answer not in the manual?
Provides safety guidelines and procedures for installing the CPX bus node and terminal.
Explains how to configure operating mode and diagnostic mode using DIL switches on the bus node.
Details on connecting the CPX bus node to an EtherCAT network, including cables and connectors.
Instructions for achieving IP65/IP67 protection by sealing unused sockets with appropriate plugs and covers.
Details the pin assignments for system, additional, and valve power supply connections.
Overview of switching on, addressing, configuration, and parameterization procedures for the CPX terminal.
Explains the address space and module identifiers for CPX terminals within an EtherCAT network.
Covers basic rules for assigning addresses to modules and the sequence of addressing within the CPX terminal.
Outlines steps for configuring the CPX terminal using software like Beckhoff TwinCAT and XML device description files.
Introduces parameterisation and describes methods like Festo Maintenance Tool and handheld unit.
Discusses CPX system settings, including fail-safe mode and parameterisation during system start.
Demonstrates parameterising input debounce time and signal extension time on a sensor.
A checklist for ensuring correct startup of the CPX terminal, including configuration and address verification.
Details the steps for safely replacing the CPX bus node and reconfiguring the system.
Summarizes available diagnostic options such as LED displays, status bits, and handheld unit interfaces.
Explains how to interpret LEDs on the bus node for operating status, errors, and connection indicators.
Describes the use of status bits for displaying common diagnostic messages and fault indications.
Details how to access detailed diagnostic information using the System Table Interface (STI).
Information on obtaining diagnostic data through the EtherCAT network, primarily using the I/O diagnosis interface.
Provides detailed technical specifications including general data, voltage supply, and network characteristics.
Provides safety guidelines and procedures for installing the CPX bus node and terminal.
Explains how to configure operating mode and diagnostic mode using DIL switches on the bus node.
Details on connecting the CPX bus node to an EtherCAT network, including cables and connectors.
Instructions for achieving IP65/IP67 protection by sealing unused sockets with appropriate plugs and covers.
Details the pin assignments for system, additional, and valve power supply connections.
Overview of switching on, addressing, configuration, and parameterization procedures for the CPX terminal.
Explains the address space and module identifiers for CPX terminals within an EtherCAT network.
Covers basic rules for assigning addresses to modules and the sequence of addressing within the CPX terminal.
Outlines steps for configuring the CPX terminal using software like Beckhoff TwinCAT and XML device description files.
Introduces parameterisation and describes methods like Festo Maintenance Tool and handheld unit.
Discusses CPX system settings, including fail-safe mode and parameterisation during system start.
Demonstrates parameterising input debounce time and signal extension time on a sensor.
A checklist for ensuring correct startup of the CPX terminal, including configuration and address verification.
Details the steps for safely replacing the CPX bus node and reconfiguring the system.
Summarizes available diagnostic options such as LED displays, status bits, and handheld unit interfaces.
Explains how to interpret LEDs on the bus node for operating status, errors, and connection indicators.
Describes the use of status bits for displaying common diagnostic messages and fault indications.
Details how to access detailed diagnostic information using the System Table Interface (STI).
Information on obtaining diagnostic data through the EtherCAT network, primarily using the I/O diagnosis interface.
Provides detailed technical specifications including general data, voltage supply, and network characteristics.
General| Mounting position | Any |
|---|---|
| Model | CPX-FB38 |
| Nominal operating voltage DC | 24 V DC |
| Ambient temperature | 0 °C |
| Display Type | Not applicable |
| Display Size | Not applicable |
| Resolution | Not applicable |
| Touch Technology | Not applicable |
| Number of Function Keys | Not applicable |
To Next Page
