Need help?Do you have a question about the Festo CPX-FB11 and is the answer not in the manual?
General| Product Name | CPX-FB11 |
|---|---|
| Category | Touch terminals |
| Fieldbus type | PROFIBUS DP |
| Operating voltage | 24 V DC |
| Protection Class | IP65 |
| Operating Temperature | 0 °C to +50 °C |
| Storage Temperature | -20 to +70 °C |
Provides essential safety and handling guidelines for installing the CPX terminal.
Details how to configure the CPX terminal using DIP switches for operation and EDS mode.
Explains the procedures and considerations for connecting the CPX terminal to a DeviceNet field bus.
Explains how to ascertain and assign addresses for modules in the CPX terminal.
Provides general instructions and steps for configuring the DeviceNet bus for the CPX terminal.
Details various methods and prerequisites for parameterizing the CPX terminal's functionality.
Outlines steps to avoid faults during the commissioning phase of the CPX terminal.
Covers the reaction of the CPX terminal to specific faults based on configuration and fail-safe settings.
To Next Page
