Festo CPX-FB36 - User Manual

Description
Network protocol
EtherNet/IP
Modbus TCP
Industrial Ethernet
2-Port
8024075
en 1611a
[8067476]
Terminal CPX
Bus node CPXFB36

Summary

1. Installation

1.2 Settings of the DIL switches

Explains how to configure the bus node using DIP switches.

1.3 Connecting to the network

Details on establishing network connectivity for the bus node.

1.5 Power supply of the CPX terminal

Guidelines and warnings for powering the CPX terminal.

2. Preparing for commissioning

2.1 EtherNet;IP protocol

Configuration and use of the EtherNet/IP communication protocol.

2.2 Modbus TCP protocol

Configuration and use of the Modbus TCP communication protocol.

3. Commissioning

3.1 Configuration

Methods for configuring the CPX terminal with the bus node.

3.2 Parameterisation

Various methods for parameterizing the CPX terminal.

3.3 Behaviour of the outputs in the “Fail safe mode” or “Idle mode”

Defines output states during fail-safe or idle conditions.

3.5 Checklist for commissioning a CPX terminal

3.6 Replacing the bus node

4. Diagnostics

4.2 Diagnostics via LED displays

Interpreting LED indicators for system and network status.

4.5 Diagnostics via EtherNet;IP

Performing diagnostics over the EtherNet/IP network.

4.6 Diagnostics via ModbusTCP

Performing diagnostics over the Modbus TCP network.

4.7 Error handling (“Fail safe”)

C. EtherNet;IP Objects of the CPX-FB36

C.4 Objects for system data and diagnostics

D. Modbus TCP objects of the CPX-FB36

D.4 Process data (Group B and D)

Festo CPX-FB36 Specifications

General

Brand	Festo
Model	CPX-FB36
Category	Touch terminals
Language	English