1. Installation
1-3
Festo CPX-FB36-EN en 1611a English
1.1 General instructions for installation
Warning
Uncontrolled movements of the actuators and loose
tubing, undefined switching states of the electronic com
ponents
Injury caused by moving parts, damage to machine and to
system
Before mounting and installation work:
Switch off the power supplies
Switch off the compressed air supply
Exhaust any pneumatic components.
Note
Electrostatically sensitive devices
Do not touch any components.
Observe the handling specifications for electrostatically
sensitive devices.
Note
Ensuring the required degree of protection
Use cover caps to seal unused connections
(è 1.4 Ensuring the degree of protection).
Information about mounting of the CPX terminal can be found
in the CPX system description (è P.BE-CPX-SYS-...).
To Next Page
Loading...
