2. Fitting
2−3
Festo P.BE−MTR−DCI−IO−EN en 0606b
2.1 General instructions
Warning
Electric shock
Before carrying out fitting, installation and maintenance
work, always switch off the power supply for the electronic
components.
Please note
Handle all modules and components with great care.
Please note especially the following:
Screw connections must be fitted free of offset and
mechanical tension. Screws must be fitted accurately
(otherwise threads will be damaged).
The specified torques must be observed.
The modules must not be offset.
Contact surfaces must be clean (avoid contact
faults).
To Next Page
