Contents and general instructions
VII
Festo P.BE−MTR−DCI−IO−EN en 0606b
Designated use
The MTR−DCI motor unit is an intelligent servo motor consist
ing of DC motor, planetary gear, encoder and integrated con
trol electronics (positioning control and position regulator).
The mechanical layout and plug−in interface of the MTR−DCI
have been optimized for use with electric linear drives (e.g.
type DMES−...) from Festo. The motor unit
can also be used
for customer−specific positioniing applications with slow
spindle drives.
This manual deals with the basic functions of the MTR−DCI
and the I/O interface of the MTR−DCI−...I0. Additional compo
nents as well as the field bus variants of the MTR−DCI are de
scribed in separate manuals.
It is absolutely necessary to observe
the Safety instructions"
as well as the designated use of the relevant components and
modules. Observe also the safety instructions in the operat
ing instructions for the electric components used.
The MTR−DCI and the connectable modules and cables may
only be used as follows:
in accordance with designated use
only in industrial applications
without any
modifications by the user. Only the conver
sions or modifications described in the documentation
supplied with the product are permitted.
in faultless technical condition.
If additional commercially−available components such as
sensors and actuators are connected, the specified limits for
temperatures, electrical data, torques, etc. must not be
exceeded.
Please observe the standards specified in
the relevant
chapters and comply with technical regulations, as well as
with national and local regulations.
To Next Page
Loading...
