14
Radio Uconnect
Use the or ▼ buttons to scroll
through the Menu functions.
Use the or buttons to change the
selected function setting.
The current status of the selected
function appears on the display.
The functions managed by the Menu
are:
❒ BASS (adjust the bass tone);
❒ TREBLE (adjust the treble tone);
❒ BALANCE (adjust the left/right
balance);
❒ FADER (adjust the front/back
balance);
❒ LOUDNESS (enable/disable the
LOUDNESS function);
❒ EQUALIZER (enable and select the
factory equalizer presets);
❒ My EQ (custom equalizer settings).
ADJUSTING THE TONE
(BASS/TREBLE)
Proceed as follows:
❒ Use the or ▼ buttons to select
“Bass” or “Treble” from the
menu;
❒ press the or to
increase/decrease the bass or
treble.
Pressing the buttons briefly makes a
gradual change. A longer press makes
quick changes.
ADJUSTING THE
BALANCE
Proceed as follows:
❒ Use the or ▼ buttons to select
“Balance” from the menu;
❒ press the button to turn up the
sound from the right speakers or
the button to turn up the sound
from the left speakers.
Pressing the buttons briefly makes a
gradual change. A longer press makes
quick changes.
Select “ or ” to set the left and
right audio outputs to the same value.
FADER ADJUSTMENT
Proceed as follows:
❒ Use the or ▼ buttons to select
“Fader” from the menu;
❒ press the button to turn up the
sound from the rear speakers or
the button to turn up the sound
from the front speakers.
Pressing the buttons briefly makes a
gradual change. A longer press makes
quick changes.
Select “ or ” to set the front and
rear audio outputs to the same value.
LOUDNESS FUNCTION
The Loudness function improves the
volume of the sound whilst listening at
low volumes, increasing the bass and
treble.
To enable/disable the function, use the
or buttons to select “Loudness”
from the menu.
The condition of the function (on or off)
is shown on the display for a few
seconds by the text “Loudness On” or
“Loudness Off”.
To Next Page
Loading...
