36
Radio Uconnect
If there are several phone numbers for
John and the number type is not
indicated, the system will display the
name together with a list of
corresponding phone numbers.
The hands-free system will ask if you
want to call the displayed phone
number.
If the displayed number is the one you
want to call, say “Yes”, otherwise say
“No”. If the contact person is the one
you want, but the number is wrong,
say “Next” or “Go back” to see the
other phone numbers for this person.
To call the displayed number, say
“Call”. You can also manually browse
through the list by pressing the or
steering wheel controls until you find
the number you want.
Now, press or SRC/OK to make
the call.
£
Press for more than 1 second to end
the call.
You can make a call in one of the
following ways:
❒ Call a name in contacts
❒ Use voice commands to call a
number
❒ Use the mobile phone keypad to
call a number
❒ Call a number from the recent calls
Refer to the TEXT MESSAGE
READER FUNCTIONS paragraph for
further information.
Calling a name in the
phonebook
To use this mode, you need to register
your phone and copy your contacts
across to the system.
?
To call a name from the contacts
using manual interaction, proceed
as follows:
Press = to activate the Main
Menu.
Select CONTACTS and then
press SRC/OK MENU.
Press or to select the
alphabetical grouping to which
the contact name belongs, press
SRC/OK or and then select
the desired name.
If the person to contact has only
one phone number, press
SRC/OK or to make the call.
£
£
£
To Next Page
Loading...
