FiberHome HG6543C User Manual

HG6543C Product Manual
1. Select Security in the navigation bar and select Firewall→URL Filtering in the
left link bar, and then click Add to open the URL filtering table configuration
page, as shown in Figure 3-27.
Figure 3-27 URL Filtering
2. Configure the parameters relevant to filtering as required. For details of the
parameters, see Table 3-17.
3. Click Apply to save and apply the configuration.
Table 3-17 Parameters for URL Filtering Parameters
Item
Description
Enable
Enables or disables the URL filtering function.
Click the Apply
button below to
apply the settings.
URL Blacklist /
Whitelist
Select the filtering mode. The white list and black list
modes are configured globally and cannot be enabled
simultaneously.
u White List indicates that the data complying with
the rules defined in the filtering table will be
allowed to pass.
u Black List indicates that the data complying with
the rules defined in the filtering table will not be
allowed to pass.
URL Address
The URL address accessed by users.
Start Time
The starting time of the filtering rule.
56
Version: A

FiberHome HG6543C Specifications

General

Brand	FiberHome
Model	HG6543C
Category	Network Router
Language	English