5.10.16 Wi-Fi scan
Figure 35: Select Wi-Fi Network Screen
Press or key to select the Wi-Fi network. Press key to
confirm and enter the password. Press key to return to normal display
mode. It is possible that your network is not listed when Wi-Fi Scan is
performed. Press button and restart Wi-Fi Scan, this will usually solve
the problem.
Only after connect to WLAN you can upload the data to weather website. If
the Wi-Fi network connects successfully, the icon will show on the left
top of the console display. If the data upload to Wunderground.com
successfully, the icon will show on the left top of the console display.
If the Wi-Fi network you would like to connect is with a hidden SSID, please
follow below steps to connect:
To Next Page
Loading...
