8
SET PLUS 2.0 - SET 2.0
Dati tecnici
Dimensioni e caratteristiche tecniche
Modelli SET PLUS 2.0 - 25/35/40
Technical data
Dimensions and specications
Models SET PLUS 2.0 - 25/35/40
Dati tecnici - Technical data
SET PLUS 2.0
25 35 40
Alimentazione elettrica - Power supply 230V / 50 hz / 1 ph
Potenza pompa elettrica min/max (W) - Primary circuit pump power min/max (W) 2 / 52
Assorbimento pompa primario min/max (A) - Primary circuit pump absorption min/max (A) 0.04 / 0.52
Potenza massima pompa di ricircolo impianto gestibile dalla centralina, pompa non fornita
(W) - Plant’s recirculating pump max power to be managed from the controller, pump is not
supplied (W)
185
Portata primario (litri/h) - Primary circuit ow rate (l/h) 2000 2800 2800
Prevalenza residua circuito primario (m.c.a.)
Primary circuit residual head (mWc)
2.0 1.0 1.0
Peso senza imballo (kg) - Weight without packing (kg) 15 16 16
Peso con imballo (kg) - Weight with packing (kg) 22 24 24
Volume circuito primario (l) - Primary circuit volume (l) 1.1 1.6 1.6
Volume circuito sanitario (l) - DHW circuit volume (l) 0.85 1.4 1.4
Pressione massima di esercizio (bar) - Max working pressure (bar) 6
Connessioni circuito primario - Primary circuit connections 1” GAS M
Connessioni circuito secondario - Secondary circuit connections 1” GAS M
Temperatura massima di utilizzo (°C) - Max operating temperature (°C) 95
Grado di protezione elettrico - Degree of protection IP40
Tipo spina collegamento elettrico - Electrical connection plug type Schuko 10-16A/250V
Lunghezza cavo elettrico (m) - Electrical cable length (m) 1.5
Portata minima di accensione (l/min) - Start-up min. ow rate (l/min) 2 2 5
Portata massima a.c.s. (l/min) - Max DHW ow rate (l/min) 40 40 100
406
80
211 90 105
Fori per ssaggio a
parete
Holes for
wall-mounting