Fischer Panda 10000x - Operation

Panda xControl
10.6.16 Kapitel/Chapter 11: Panda xControl - Seite/Page 155
last module in the row must have a termination resistor plugged into the second RJ45 socket.
It is mandatory to use the Fischer Panda bus cable to connect the modules.
Fig. 11.0-1: xControl CP-G Reverse Side
Fig. 11.0-2: Connection Schema
Operation
The xControl will be controlled with the xControl CP-G panel.
Fig. 11.0-3: xControl CP-G Front Side
RJ45