EasyManua.ls Logo

FiT REMOTE DISPLAY - Page 36

Default Icon
53 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
INSTRUCTION MANUAL FIT REMOTE DISPLAY PINION
Error code Error message displayed Action / Restriction
0D-07 Speed node authentication error 1. Restart the system.
2. If the problem persists, please contact your
specialist dealer.
0D-08 Gears authentication error 1. Restart the system.
2. If the problem persists, please contact your
specialist dealer.
0D-0A Charger authentication error 1. Restart the system.
2. Switch the system off.
3. Disconnect the charger from the system and
socket.
4. Wait until status LED goes out.
5. Check plug contacts on the e-bike and charger
and clean if necessary.
6. Reconnect the charger to the socket.
7. Reconnect the charger to the system and start
the system.
8. If the problem persists, please contact your
specialist dealer.
0D-0B Lock authentication error 1. Restart the system.
2. If the problem persists, please contact your
specialist dealer.
0E-xx Remote authentication error 1. Restart the system.
2. If the problem persists, please contact your
specialist dealer.
0F-00 Remote update error 1. Restart the system.
2. If the problem persists, please contact your
specialist dealer.
0F-01 Motor update error 1. Restart the system.
2. If the problem persists, please contact your
specialist dealer.
0F-02 Display update error 1. Restart the system.
2. Switch the system off.
3. Remove display from holder, check contacts and
clean if necessary.
4. Re-insert the display and start the system.
5. If the problem persists, please contact your
specialist dealer.
0F-03, 0F-04,
0F-05, 0F-06
Battery update error 1. Restart the system.
2. Switch the system off.
3. Remove the battery from the holder, check
contacts and clean if necessary.
4. Re-insert the battery and start the system.
5. If the problem persists, please contact your
specialist dealer.
0F-07 Speed node update error 1. Restart the system.
2. If the problem persists, please contact your
specialist dealer.
0F-08 Gears update error 1. Restart the system.
2. If the problem persists, please contact your
specialist dealer.
FIT_Manual_Remote_Display_Pinion_V3_en | Version 03 | 24.10.2023 36