Dreamer NX User Guide | www.flashforge.com
6.2.3 Loading
You can load a model file or Gcode file into your FlashPrint by the following six
Method 1: Click the [Load icon on the main interface. Then select the object
Method 2: Select the file for loading and drag the file to the main interface of
Method 3: Click [File]--[Load File]. Then select the object file for loading.
Method 4: Click [File]--[Examples] to load the example files
Method 5: Click [File]--[Recent Files] to load the files opened recently.
Method 6: Select and drag the target file to the icon of FlashPrint.
Note: 3D models can be stored as .STL, .OBJ, .3MF and .FPP file and
support edit by FlashPrint.
Move model around on XY-axis; shift+click to move along Z axis
Turn and rotate your model
Scaling the size of your object
Cut the model into several parts.
Print it directly with your Dreamer NX or export to SD card.
Select right or left extruder you want to print with.
To Next Page
Loading...
