Dreamer NX User Guide | www.flashforge.com
which generally can save print time.
6-14
● Speed
a. Print Speed is the moving speed of the extruder. Generally, the lower
speed is, the better print you will get. For PLA printing, 60 is recommended.
b. Travel Speed is to control the moving speed of the extruder under
non-printing status during work. For PLA printing, 80 is recommended.
Note: Modify parameters settings to get better prints as different models need
different parameters.
● Temperature
Right Extruder Temperature: Recommended extruder temperature is
220℃.
Note: Different temperatures have subtle influences in printing. Please adjust
the temperature according to the condition in order to get a good print.
Platform Temperature: To set the temperature of Platform.
● Others
Cooling Fan Control: Set up the time to turn on the cooling fan. You can
pre-set the height and make the cooling fan begin to work at the point.
Pause At Heights: Allow users to pre-set a height in which the print will
suspend automatically. The function usually applied when you want to change
the filament at a certain point.
To Next Page
Loading...
