FlashPoint eVOLV 200 R2 - Custom Function (C.Fn) Settings; Custom Function Reference Table; Navigating the C.Fn Menu

17
C.Fn: Setting Custom Functions
Custom
Function
Display
Number
Functions
Setting
Display
Setting &
Descriptions
Limitations
F1 Beeper
ON ON
NO
OFF OFF
F2
S1/S2 mode
selection
OFF OFF
M mode
S1
S1 Mode
S2 S2 Mode
F3 Auto hibernate
OFF OFF
NO
30 min
Auto hibernate with-
out any
operation
60 min
90 min
F4 Delay ash OFF,
Can be triggered as
second curtain
M/Multi
mode
F5 Mask
OFF OFF M mode
N1
ON: Trigger 2 times for
1 cycles, 1st ash of
trigger.
M mode
N2
ON: Trigger 2 times for
1 cycles, 2nd ash of
trigger.
F6
t0.1 display
ash duration
ON Display
M mode
OFF No Display
1. Long press < C.Fn > button for 2 seconds to enter the C.Fn menu.
2. Select the Custom Function.• Turn the Selection Dial to select the Custom Function. An icon appears on
the lower portion of the LCD screen to represent the Custom Function selected.
3. Change the setting. • Press < SET > button and the Setting No. blinks. • Turn the Select Dial to set the
desired feature. Press < SET > button will conrm the settings.
4. Exit C.Fn menu • Press < Mode > button to exit.