FlashPoint eVOLV 200 R2 - Control Panel and LCD Display; Control Buttons Overview; LCD Panel Information & Icons

7
(A) R2 Radio Status
Radio Operation Pg 15
Manual Operation Pg 12
(B) Channel Status Pg 15
(C) MODE: TTL/Manual/Multi Flash Pg 11-13
(D) High Speed Sync Pg 14
(E) Battery Level Pg 10
(F) TTL (FEC) Exposure Compensation /
Manual Power Setting Pg 12
(G) Flash Duration / Multiash Frequency /
Sleep Pg 13
(H) Overheat Warning Pg 19
(I) Modeling Lamp Pg 11
(J) Sleep Status Pg 11
(K) Optic Slave Pg 16
(L) Audio Signal Pg 17
(M) Timer Pg 17
(N) Mask Status Pg 18
(O) Flash Duration Symbol Pg 12
(P) Custom Function Pg 17
(Q) Group Pg 15-16
Control Panel:
LCD Panel
Figure E
Figure F
15. LCD Panel
16. <GR/CH>Group/Channel Button
(long press for 2 seconds)
17. Flash Ready Indicator, < / C.Fn>
Test Button/ C.Fn Button
(long press for 2 seconds)
18. Select Dial
19. <SET> Set Button
20. < /
H
> Modeling Lamp Button/
High Speed Sync Button (long press for 2
seconds)
21. < MODE / > Mode Selection Button/
Wireless Selection Button
(long press for 2 seconds)