FlashPoint eVOLV 200 R2 - Firmware and Technical Data; Firmware Upgrade Procedure; Model and Wireless Specifications; Performance and Sync Specifications

20
Technical Data
Model eVOLV200
Wireless Slave Unit
*Radio transmission mode (compatible with Nikon & Canon &
Sony )
Flash Mode
Wireless o M/Multi
Slave unit of radio transmis-
sion
TTL/ M/Multi
Compatible Cameras
under Radio Transmission
(as slave unit)
Nikon cameras (R2N as master unit)
Canon EOS cameras (R2C as master unit)
Sony cameras (R2S as master unit)
Guide No. (ft/m ISO 100)
Speedlite ash head: 170ft/52m (ISO 100) 35mm coverage
Bare bulb ash head: 196ft/60m (ISO 100, with the standard
reector)
Flash Duration
Speedlite ash head: 1/220 to 1/13000 seconds
Bare bulb ash head: 1/220 to 1/11300 seconds
Power Output 200W
Power Range 8 steps: 1/128~1/1
Stroboscopic Flash up to 90 times, 99Hz
Flash Exposure Compensa-
tion (FEC)
Manual. FEB: ±3 stops in 1/3 stop increments.
Sync mode
High-speed sync (up to 1/8000 seconds), rst-curtain sync, and
second-curtain sync
Firmware Upgrade
This ash supports rmware upgrade through the USB port.
Update information will be released on our ocial website.
Note: Press < MODE > button and turn the ash on, the rmware update version (e.g. Version 1.0
will read U-1.0) will be displayed on the panel.
A USB cord is not included in this product.
The USB port is a standard Micro USB socket.