4
For Your Safety
• Always keep this product dry. Do not use in rain or in damp conditions.
• This product contains high-voltage electronic parts. Touching the high-voltage circuit inside it may
result in electric shock. Do not disassemble. Should repairs become necessary, this product must
be sent to an authorized maintenance center.
• Stop using this product if it breaks open due to extrusion, falling or strong hit. Otherwise, electric
shock may occur if you touch the electronic parts inside it.
• Do not use the ash unit in the presence of ammable gases, chemicals and other similar
materials. In certain circumstances, these materials may be sensitive to the strong light emitting
from this ash unit and re or electromagnetic interference that may result.
• Do not leave or store the ash unit if the ambient temperature reads over 120°F/50°C
(e.g. in sun drenched automobile). Otherwise the electronic parts may be damaged.
• Do not use any power supply other than the included one to charge the battery.
• Do not insert metal parts into any lighting equipment.
• Do not touch the electrical contacts on the strobe or battery or contact them with any conductive
materials.
• Do not re the ash directly into the eyes (especially those of babies) within short distances. Other-
wise, visual impairment may occur. When taking pictures of babies, keep the ash unit at least 3.3
feet (1 meter) away from them. Using bounce ash to reduce light intensity is also recommended.
• This strobe has an over-heat protection circuit, rapid continuous ring will cause the strobe to slow
operation and trigger a “cool down” period. After this period, the strobe will resume normal opera-
tion. You may also reboot the strobe by cycling the power o and then on.
• The strobe has a locking mechanism to ensure secure operation. To avoid damage, slide the release
before removing any reectors or accessories.
• In case of abnormal function, sparks, excessive heat, ames or smoke, immediately power o the
unit and disconnect the battery if safely possible. Have it checked by an authorized technician.