Troubleshooting
6 9
Q2
A
I connected an external monitor, but why are the monitor screens
overlapping and unstable?
F L AT O P′s TFT LCD uses 1024 x 768 resolution. This resolution is
applied to the external monitor. Therefore the screen could be distorted
or tremble. Adjust the external monitor′s resolution according to the
following procedure.
1. Refer to the monitor′s User Manual and check the supported
r e s o l u t i o n s .
2. Select Di s p l a y from the Control Panel.
3. Select Settings tap in the Display Properties.
4. Set the resolution that the monitor supports and click Ye s
If the above procedure doesn′t solve the problem, check that the
F L ATOP video driver is correctly configured in the Display Properties
Q3
A
I reinstalled Windows 98. Why do the sound, VGA, and LAN cards
m a l f u n c t i o n ?
To use FLATO P′s sound, VGA, and LAN cards after reinstallation, install
all the drivers provided by the manufacturer again. You can download
those drivers from FLATO P′s website at www. f l a t o p . c o . k r.
※ Please refer to ″Installing drivers″on Page 18
To Next Page
Loading...