Fleck 6600 User Manual

6600 – 6665 – 6700 – 6765
E
N
G
L
I
S
H
3
1 - VALVE SPECIFICATION
Installation N° System capacity
m
3
°tH
Valve serial N°
Inlet water hardness
°tH
Tank size
Water hardness after mixing valve
°tH
Resin type
Brine tank size
litres
Resin volume
Quantity of salt per regeneration
Kg
VALVE TECHNICAL CHARACTERISTICS
VALVE TYPE
6600/1600 6665/1600 6700/1600 6765/1600
TRIGGERING SET REGENERATION
Meter immediate Days
Litre
Meter delayed
REGENERATION TIME
Timeclock 2 A.M.
or
a.m./p.m.
REGENERATION CYCLES ACCORDING TO PISTON TYPE
Cycle 1
Cycle 2
Cycle 3
Cycle 4
Cycle 5 (6 cycles valve only)
Cycle 6 (6 cycles valve only)
HYDRAULIC SETTINGS
Injector size Pressure regulator
Drain line flow control (DLFC)
GPM 1,4 bar (20 PSI) 2,1 bar (30 PSI)
Brine line flow control (BLFC) GPM Without
VOLTAGE
24V/50- 60Hz with transformer
Valves complying european regulations:
- Nr. 2004/108/CE, “Electromagnetic compatibility”
- Nr. 2006/95/CE, “Low voltage”
- Nr. D.M. 174/04, Italian regulation

Fleck 6600 Specifications

General

Brand	Fleck
Model	6600
Category	Control Unit
Language	English